AMSORT’s CEO Joanna Staniewska was included in the top ten of “The 100 Most Enterpreneurial Women in Poland” plebiscite organized by Puls Biznesu. The award ceremony was held in December 2015 at the Grand Theatre in Warsaw.
C-track system can be used wherever strip brushes need to be replaced quickly and frequently. For example, heavy use might result in a high degree of bristle wear, or changing conditions might require brushes with different characteristics. Whatever the reason, the brushes can be removed from the track quickly and easily and replaced by new […]
F-RAT system (Flat Right Angle Transfer), designed by Itoh-Denki is used to change the direction of transmitted loads transported on the conveyor line. Characteristic of this solution is its very compact structure where the drive fits in its bearing surface while the height is only 15 cm. The maximum conveyed weight is 50 kg. Goods […]
Method of installation is the same as in braking rollers. Correct installation allows constant contact of the braking roller with the pallet or transported product. Loss of constant contact can result in damage to braking rollers due to high speed of transported product. Conveyor braking rollers come in 80 and 89mm dimensions. Each braking roller […]
Pallet conveyors (accumulated gravity storage). Modified version of typical roller tracks allowing pallet storage with gravitational feed. What this means in practice is as follows: during pallet loading, forklift pushes the pallet “upwards’ on sloped tracks, whilst during unloading, pallet is taken off from the same side while the next pallet slides into the first […]
Warehouse stocks (unloading systems, gravitational conveyors for large loads). These are made up of roller rails of high load capacity located at floor level at certain pitch or installed on stack shelves. Such system allows for maximum warehouse storage utilization, improves loading and unloading of pallets which in turn reduces costs and time. Rollers are […]
Widened pallet roller rails are used where, standard pallet rails cannot be used due to rollers of 74mm size, which can be too small or where a wider area of travel is needed. Because of this pallets of 1000mm and 800mm width can be transported on 2 or 3 widened pallet roller rails. Rails […]
Pallets on these rollers can be transported either lengthways or across. For cross transport roller spacing should be at 52mm. In lengthways transport depending on pallet weight 2-3 rails are required with 104-208 roller spacing Pallet roller rails are the best solution for pallet moving orientated across the conveyor. They are mainly used in […]
Roller rails of high load capacity designed for large weight of transported goods. Due to their properties they complement universal roller rails. In many applications they are the only solution. Rollers with ball bearings placed inside the “U” profile with 50 x 58 x 50 x 2.5 mm dimensions and 40 daN (kg), easily replaceable. […]
Universal rails made out of hard drawn 2mm zinc profiles. Profiles have two series of holes at different heights spaced out at 25mm. The base is also drilled to accommodate holes spaced out at 25mm. Hole diameter is 8.1mm. The construction allows for installation off wheels of 48mm diameter with the use of specially made […]
Mainly used in industries where products are sorted, packed, consolidated etc…An obvious advantage of this system is differential size of transported goods whilst still using the same space saving rollers. Due to these features transport is reliable and sensitive towards the goods being transported. Paramount feature in the food processing industry is ability to clean […]
